• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

radio scanner ma / com 700p

Status
Not open for further replies.

eroal

Member
Joined
Aug 28, 2010
Messages
5
Greetings, I have a radio scanner ma / com 700p and I need to program it and not someone could steer it. thanks in advance
 

Radioman96p71

Member
Feed Provider
Joined
Jan 11, 2008
Messages
1,081
Hmmm...

Seems you need to purchase a copy of RPM and then learn how to properly set up a radio to not cause interference on the network. I'd highly recommend you check the threads in this forum, this has been discussed at great length.

On a personal note, it's a very bad idea to buy a radio with the intention of just programming it up to work on a trunking system without tremendous knowledge about the inner workings of the system. Not to mention a valid LID and permission from the SysOp to operate on the system if that is your goal.
 

eroal

Member
Joined
Aug 28, 2010
Messages
5
The purchase of radio was made to work on a company's roadside assistance by cranes and is important to monitor the police and medical emergencies in the region.



Hmmm...

Seems you need to purchase a copy of RPM and then learn how to properly set up a radio to not cause interference on the network. I'd highly recommend you check the threads in this forum, this has been discussed at great length.

On a personal note, it's a very bad idea to buy a radio with the intention of just programming it up to work on a trunking system without tremendous knowledge about the inner workings of the system. Not to mention a valid LID and permission from the SysOp to operate on the system if that is your goal.
 

rdale

Completely Banned for the Greater Good
Premium Subscriber
Joined
Feb 3, 2001
Messages
11,380
Location
Lansing, MI
Just contact the fire/EMS agency and they can program it for you, usually at no cost.
 
Status
Not open for further replies.
Top