Radio Shack Pro 433 Pro-433 Audio Problem

[zzdiesel]

Couldn't you upload the file to Rapid share or the likes & post the link so anyone who wants it can get it?

I sold my 433 on eBay as is and the buyer gave me bad feedback.

 

[mruell_1]

My Pro-433 repaired

I ALSO have a pro-433 with the aforementioned audio problem.
will you (DickH) please also email the schematic to me, too?

i may have the same problem as the other person had. i am not getting any audio, even after resetting the scanner twice.

TIA

--Ryan

What I found was a bad switch inside the Ext speaker jack on the back of the scanner. I removed the back case and found the jack to be an open type jack, just need to bend the contact back in position. It has been working great for about 3 weeks now.
mruell_1

 

[DickH]

Couldn't you upload the file to Rapid share or the likes & post the link so anyone who wants it can get it?

I sold my 433 on eBay as is and the buyer gave me bad feedback.

I don't know anything about Rapid share, etc. The schematic alone isn't much help.
The Service Manual is a CD (about $6) and it has all test info, alignment, voltages, etc., etc.

 

[zzdiesel]

Ok. I understand.

 

[ProphetPX]

I don't know anything about Rapid share, etc. The schematic alone isn't much help.
The Service Manual is a CD (about $6) and it has all test info, alignment, voltages, etc., etc.

so why can't you make an image of the CD and put it up for filesharing?
or at least tell me how to buy my own service CD, please.
I did not want to trouble you ...

 

[DickH]

... tell me how to buy my own service CD ....

Read post #19 in this thread.

 

[mruell_1]

so why can't you make an image of the CD and put it up for filesharing?
or at least tell me how to buy my own service CD, please.
I did not want to trouble you ...

If you send me your e-mail I will send it to you.

 

[datashifter]

If you still have it available, please let me know. I need a copy of the RSU "12449039 MANUAL SERVICE 20-0433."

Thank you for your time!