Sdrtrunk idle

[miked9372]

getting status idle worked fine for months without and issues but for the last two days it will monitor for about two hours then go offline and show an idle status with sync loss bits processed for messages along with NAC:1029 TSBK1 CRC-failed

Have V0.5.0 Beta 5 Like i said i didn't change any settings not sure why it keeps going idle now

Monitoring 851.550 with two RTL-SDR LSM with 3 max channels with ignore data calls
Have turners with enable auto PPM with 495 master and sample rate of 2.560

 

[SkinnyFirefighterMS]

The only thing I can tell you is, to go ahead and get DSDPlus Fast Lane. That is the only reason why I stop using SDRtrunk because of that and the damn new update. SDR Trunking was good but the update **** it up and when your signal is bad, you ain't going to pick up nothing.
With DSDPlus Fast Lane you can pick up anything like FM, NXDN, and P25 Phase 1 and 2, and also it is good with simulcast, EDACS, and DMR. It cost like $10

 

[maus92]

SDRTrunk works great, and the audio is superior to DSD+ Fast Lane. If SDRTrunk was working great, then suddenly not, that indicates a change somewhere in the ecosystem. It could be a change or fault on the transmit side, a new source of local interference, weather, a hardware fault with the SDR or antenna system, or an OS update. SDR radios can fail over time; I've burned one up.

 

[miked9372]

SDRTrunk works great, and the audio is superior to DSD+ Fast Lane. If SDRTrunk was working great, then suddenly not, that indicates a change somewhere in the ecosystem. It could be a change or fault on the transmit side, a new source of local interference, weather, a hardware fault with the SDR or antenna system, or an OS update. SDR radios can fail over time; I've burned one up.

my computer did restart with a automatic update even though i turned those off not sure if some settings got changed when i reopened SDR or if the drivers are at fault.

 

[noamlivne]

getting status idle worked fine for months without and issues but for the last two days it will monitor for about two hours then go offline and show an idle status with sync loss bits processed for messages along with NAC:1029 TSBK1 CRC-failed

Have V0.5.0 Beta 5 Like i said i didn't change any settings not sure why it keeps going idle now
View attachment 128754
Monitoring 851.550 with two RTL-SDR LSM with 3 max channels with ignore data calls
Have turners with enable auto PPM with 495 master and sample rate of 2.560

I also have this.
When Idle happens, go to the Tuners tab, and change the PPM value just a bit (up or down), and/or enable/disable the Autocorrect box.
That should whack the program back to life (till the next time it happens - then repeat).
I think it's a bug. Others have it as well.

 

[maus92]

I run two Airspys on two separate systems 24/7 for weeks at a time with no restarts except for OS updates. My SDRT system works flawlessly. The host PC is an i5 of recent vintage and is not resource constrained, and I monitor the systems from within their service area.

 

[dave3825]

Idle is generally signal related. Check ppm and gain settings. I do not use auto gain, I do them manually. Also check coax and antenna connections.

the only reason why I stop using SDRtrunk because of that and the damn new update. SDR Trunking was good but the update **** it up and when your signal is bad, you ain't going to pick up nothing.

What version were you running before the update? Updates are optional and you can still use the previous version if you kept the installs separated. I can run beta 3, 4 and 5 at any time. 5 seems to bog down my system and 3 is suiting my needs at the moment.

 

[miked9372]

my SDR seems to be getting worse now i have to reset it about every 4 hours last week it was about once a day. i have not changed setting and am running Beta 6

 

[SkinnyFirefighterMS]

Idle is generally signal related. Check ppm and gain settings. I do not use auto gain, I do them manually. Also check coax and antenna connections.



What version were you running before the update? Updates are optional and you can still use the previous version if you kept the installs separated. I can run beta 3, 4 and 5 at any time. 5 seems to bog down my system and 3 is suiting my needs at the moment.

I was using beta 5, But atm I am using DSDplus. And I also gotta upgrade my antenna, I need a 700/800 Mhz or wideband antenna.