SDS200 Programing Middlesex and NJICS

[NJJosh]

I recently got a SDS200 scanner to replace our old one at work. I am trying to add channels on the Middlesex County P25 system and NJICS system. I program it through the uniden sentinel software and it isn't picking up either system. The software and scanner are both on most current firmware. Am I doing something wrong? I know both systems are TDMA but from what I've read the SDS series scanners shouldn't have an issue.

 

[kd2pm]

Go to the profile and make sure you have monitor and download on in the scan selection tab for the favorite lists you created for both Middlesex Co and the NJICS P25. Then in the service type tab, have them all checked off as active.

 

[policefreak]

I suspect that for the NJICS when you appended that system to your favorites list, the software pulled in every single site. So as your scanning the scanner is stopping on all 30 something sites but you're really only in range of like 3 of them.

 

[NJJosh]

Go to the profile and make sure you have monitor and download on in the scan selection tab for the favorite lists you created for both Middlesex Co and the NJICS P25. Then in the service type tab, have them all checked off as active.

Thank you! the issue I think I was having was with the service types. Thanks for the help I got middlesex working haven't heard anything on NJICS yet so I'll have to see.