Tfitzmaurice89
Member
Would somebody please do a quick walkthrough with programing spotsylvanina fire EDACS for me? Wide or narrow and what is, what freq and what an LCN is? Thanks it is very apprecated.
Spotsy Fire
- Thread starter Tfitzmaurice89
- Start date
- Status
It's an EDACS wide system.
The LCNs (logical channel numbers) are the channel "slots" where the frequencies need to be programmed. For example, the frequency for LCN 1 goes in the first slot, LCN 2 goes in the second, etc.
See this webpage for more help on getting an EDACS system programmed in a 396T:
Easier to Read BCD396T/UBCD396T Digital Scanner Manual edacs system
Dave
The LCNs (logical channel numbers) are the channel "slots" where the frequencies need to be programmed. For example, the frequency for LCN 1 goes in the first slot, LCN 2 goes in the second, etc.
See this webpage for more help on getting an EDACS system programmed in a 396T:
Easier to Read BCD396T/UBCD396T Digital Scanner Manual edacs system
Dave
- Status
Similar threads
