• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Syntor X9000 Trunked Radio

Status
Not open for further replies.
firetaz834

firetaz834

Member
Joined
Dec 21, 2007
Messages
323
Location
Metro Area, MI
Have a question for the group. I have had a Syntor X9000 trunked unit sitting around for a bit and was thinking of just getting it programmed for receive only for my local area. The question I have is can it be set up that way by my local radio shop, or is not going to be possible to do to monitor my local agencies in my area?

I know some might say, why not get a scanner, but I felt that if I have the radio laying around, why not at least try and have it done, unless I'm told by the more knowledgable people in the group that it can't

Thanks, in advance

Frank
 
C

comsec1

Guest
software

if you can even get the software you would still need to get a old computer to have it work and you have to program the head separately if I remember right. very difficult to program a trunk system from scratch. I did one just for the ITAC channels a few years ago
 
Status
Not open for further replies.

Similar threads

N1SQB
HT1250 Warris CPS Question!
Replies
1
Views
288
ff026
F
E
APX programming question
Replies
6
Views
809
NorCalrescue
N
F
XPR Region not Supported, but Region is Correct for CPS
Replies
1
Views
495
KJ4DHF
K
M
XPR 5550 Digital RX Group List
Replies
5
Views
412
mapper65
M
S
Can I program a single site of a Cap Max system using CPS?
Replies
2
Views
289
Steve_eo
S
Top