Trunk88 & Unitrunker/Trunker

[landonjensen]

Is there any way to run Trunk88 while also receiving audio? Everytime I do both, it drops out the data....

Also need help setting up Unitrunker / Trunker with my GRE PSR600.

I have no idea how to setup my scanner on the above two programs to work on the ICIS system here in Glendale CA. I have my USB via the PC/IF input. Com Port 4.. Thats as far as I know.

Thank you

Landon J

 

[kma371]

No. You can only do one or the other. You can get a second scanner?

 

[landonjensen]

Ah bummer..

Any tips for setting up my scanner on Unitrunker? I have no clue how... ICIS is the system I am looking to set it up on.... Cant find a good manual online.

 

[SCPD]

See the Utah radio guide ...

http://utahradio.org/mediawiki/index.php/UniTrunker_Guide

I just noticed their webserver is down for maintenance.

Here's a postcard version:

Set your PSR600 to Tune mode and enter the active control channel frequency.

Install & run program.
Click receivers tab.
Click the plus sign "+" to add a new receiver.
Choose "inline" as the receiver type.
Double click on the new receiver entry.
In the receiver window fill out the serial port settings - port, baud rate is 115200, 8 data bits 1 stop bit and no parity.
Set the receiver role to "signal".

Double check settings.
Set the receiver run state to running.
The USB cable should start blinking.

On a good signal, a site window appears.

Note that if you want voice, you'll need a second radio.

 

[Highpockets]

The Utah Site (UniTrunker Guide) was hit by a Script Kiddie and will by down for a couple of days.