• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

VX-10 transmit issue

Status
Not open for further replies.
A

airboss1634

Member
Joined
Mar 28, 2010
Messages
36
I have a UHF VX-10 with the FTT-14 keypad, and a brand new fully charged battery. When transmitting I get a solid buzzing noise with no voice on high and low power. However, when I remove the antenna and transmit for short periods of time, it transmits normally. I also tried another antenna from its twin, and it has the same issue. Anybody run across this before?
 
Status
Not open for further replies.

Similar threads

N
EVX R70 REPEATER STATION BACKUP POWER FEATURE
Replies
0
Views
447
nokones
N
Flatshovel
Alinco: Alinco DJ-MD5 Issues
Replies
0
Views
335
Flatshovel
Flatshovel
B
  • Locked
SDS100/SDS200: Swollen SDS100 Battery
Replies
1
Views
544
KevinC
KevinC
K
Lowband Maratrac Speaker Feedback on Transmit
Replies
5
Views
685
KA0XR
K
N9JIG
Scanner Tales: The cars (and a few trucks and vans)
Replies
10
Views
2K
w2lpa
w2lpa
Top