Worng/Mislocated Tower ID 6-015

Status
Not open for further replies.

BlueIce

Member
Joined
Sep 5, 2009
Messages
18
Location
Minneapolis Area
I was at this location 47.198081,-94.624997 - Google Maps.

With some research and I located FCC Callsign WQLI519

With no antenna an ATT on. Pro69Com showing a decode receive rate 100% 40 out of 40. Pro60Com was showing it as tower 615 along with my radio. The Grant Log is also showing many transmissions of the CWID but no call sign sent. This location is no where near Gatzke, either 615 is mislabeled on the MN SRB ARMER Status Map or the tower is not programed correctly.


Pro69Com shows the following:
#This section is here for information only. With the exception
#of the Call Sign(s), This data is not Read back into the program at all.
System ID : 40F
System Name : Allied Radio Matrix for Emergency Response (ARMER)
WACN : BEE07
Tower Number (Decimal): 615
Tower Number (Hex) : T060F
Tower Description : Gatzke
Control Capabilities : Voice,Registration
Call Sign(s) :
Timestamp : Sun Jul 18 11:54:38 2010

-Tables
#Format: Table ID,Base Freq,Spacing,Input Offset,Assumed/Confirmed,BandWidth,Slots
00,851.00625,0.00625,-45.00000,"Confirmed",0.00625,1
01,762.00625,0.00625,30.00000,"Confirmed",0.00625,1

-Frequencies
#Format: Channel,Usage,Frequency(/Slot),Input Frequency(/Slot),Hit Count
"00-0061","c",851.38750,806.38750,0
"00-0877","i",856.48750,811.48750,1
"00-1113","a",857.96250,812.96250,0

-Neighbors
#Format: TowerID,TowerIDHex,System ID,Channel,Frequency,Tower Name
431,"T041F",40f,"00-0151",851.95000,"Leader"
513,"T050D",40f,"00-0837",856.23750,"Quadna - Hill City"
514,"T050E",40f,"00-1277",858.98750,"Emily"
544,"T052C",40f,"00-0279",852.75000,"Itasca County Simulcast"
668,"T0644",40f,"00-1321",859.26250,"Wolf Lake"
670,"T0646",40f,"00-0191",852.20000,"Mantrap"
680,"T0650",40f,"00-1393",859.71250,"Bemidji Fire Tower"
 

REDave

Member
Joined
Jun 15, 2007
Messages
100
Location
Metro Area MN
The SRB ARMER Status Map is correct. The info I got is that they are using the 615 tower nomenclature for the 504 tower site. The 504 site which is in Zone 5 does not have connectivity in place yet. They have connectivity from Zone 6 to the 504 site however, so they are using (Zone 6) 615 nomenclature because that site is still in the construction phase and will not be done until 2012. When they get connectivity from Zone 5 to the 504 site in 2011 they will then remove the 615 nomenclature.
Clear as mud I know.
 
Status
Not open for further replies.
Top