multicoupler

  1. Stridsberg MCA104M HF 4 port Multicoupler

    Stridsberg MCA104M HF 4 port Multicoupler

    I have no need for this any longer. It is as new, less than a year old (I can probably find the receipt if necessary). In excellent condition, used indoors only and very lightly at that. Purchased directly from Stridsberg. Includes original box, packing, power supply, and data sheet as shown in...
  2. J

    Multiple scanners/one antenna.

    I have a SDS200 and a Pro 2052 I'd like to use with my DS-150S discone. Guess I need a coupler (or multicoupler?), the one on Scanner Master is still sold out, any other reccomendations? Is it as simple as that or any other parts or considerations? I may use this antenna for transmitting also...
  3. SOLD:  Stridsberg MCA208M/N 8-port coupler

    SOLD: Stridsberg MCA208M/N 8-port coupler

    For Sale: a Stridsberg MCA208M/N 8-port receiver multi-coupler in excellent condition from non-smoking house, 25MHz-1GHz, 50 ohm. BNC terminals for the 8 ports out and Type-N for antenna input. With power supply. Frequency Range: 25 MHz to 1 GHz. 8-Ports Nominal Impedance: 50 ohm Port-To-Port...
  4. rjvalenta

    my TV preamp scanner surprise...

    not sure if this is the right forum for this, but i thought i'd pass this along because i hadn't seen anyone mention this before. i'm trying to feed 4 scanners from my roof Tram discone. the feed comes in to my attic and splits off via multiple SMA pigtails to an SDRDuo, down a 20ft 50ohm...
  5. S

    Has Stridsberg Engineering gone under?

    I ordered an MCA208 multicoupler nearly two weeks ago now and haven't heard anything from Stridsberg, so I emailed them on Monday and have yet to receive a reply. I tried calling both their local and 800 number and it rings to an answering machine. I left a message there and still haven't...
  6. G

    Active Multicoupler > 1 GHz

    Any experience with active multicouplers that support up to 1500 MHz. I am using Stridsberg active multicouplers up to 1 Ghz successfully now. Applications would be ADS-B, GPS, Inmarsat.
  7. R

    Build Mini Circuits multicouplers or buy Sdridsberg?

    I currently have an Electroline 8 port drop amp. It feeds radios, and a Sdridsberg MCA208. Single antenna is a home-made dipole sitting in the shack, using RG6 coax right now. I'm feeding 6 scanners, 2 commercial radios (RX only), and 5 SDRs. 5 more SDRs going in the mix soon. Several other...
  8. STRIDSBERG 4 Port Multicoupler N.I.B.

    STRIDSBERG 4 Port Multicoupler N.I.B.

    New in box, Stridsberg MCA204, four port BNC powered multicoupler 25MHz-1 GHz. Enables up to 4 scanners or radios to share the same antenna without loss of signal strength. Includes 12vdc adapter and paperwork. $165 shipped continental U.S. Paypal or USPS Money Order.
  9. Stridsberg Engineering   MCA204M  VHF/UHF Receiver Multicoupler  -  25 MHz to 1 GHz

    Stridsberg Engineering MCA204M VHF/UHF Receiver Multicoupler - 25 MHz to 1 GHz

    BRAND NEW IN BOX, NEVER BEEN OPENED Ordered and realized it's not what I needed. Frequency Range: 25 MHz to 1 GHz 4-Ports Nominal Impedance: 50 ohm Port-To-Port isolation (min): 22 dB Return Loss (all ports): > 20 dB P1dB = 17 dBm (output) 3OIP = 32 dBm (output Coupler Gain/Loss: +2 dB to...
  10. Stridsberg MCA204M ***SOLD***

    Stridsberg MCA204M ***SOLD***

    Like new. Used for 10 days. Comes with box, and power cable can email pics $160 shipped priority https://www.scannermaster.com/4_Port_MCA204M_VHF_UHF_Receiver_Multicoupler_p/02-530557.htm
  11. Stridsberg 800MHz Multicoupler

    Stridsberg 800MHz Multicoupler

    Stridsberg active multicoupler model number MCA804/B. Unit is about 9 years old and has worked flawlessly. Was installed in my shack, never in a mobile application. DC Power supply is also included but not pictured. Asking $85.00 or best offer. Shipping to CONUS only. Paypal preferred...
  12. SlipNutz15

    Daisy chaining multicouplers

    Has any every daisy chained multicouplers? The reason I'm asking is because I'm going to be mounting a commercial grade VHF/UHF antenna outside with good feedline inside to my 8-port multicoupler. I have an unused port on the 8-port and my online scanner feed with a 4-port multicoupler is in...
Top