10 meter FM on BCD3252P@

[greenwoodboy]

Hello all, I just noticed that my BCD3252P2 radios won't receive 10 meter FM signals, such as 29.6000, 29.6200, 29.6400, 29.6600 & 29.6800. I have 5 of these radios and none of them will receive those signals. 10 meters is very active now. My SDS100 will receive these signals well. I used to have a BCD125AT, which would also receive these signals well. But not the BCD3252 radios. ALL radios (inlcuding the SDS100) are connected to the same antenna using a Stridsberg multicoupler. Any thoughts?
Again, a BCD125AT radio would hear these, but not the BCD3252P2.

Thanks.

 

[bearcatrp]

When it stops on one of those frequencies, what does it do? Or does it pass them?

 

[greenwoodboy]

It doesn’t even stop scanning.

 

[tvengr]

I was able to program the frequencies manually using my BCD325P2. I don't know if they are active in my area. What deviation is used for those frequencies?

 

[greenwoodboy]

Deviation is set to Auto. Otherwise, it should be NFM. Thanks.

 

[wtp]

how close were the transmissions from the radio ?

 

[greenwoodboy]

The signals are coming from the East coast. I am in Arkansss.

 

[wtp]

OK, i did not want to hear that they were next to each other.

 

[bearcatrp]

Any issues with FM stations close by? I had to get one so I could pick up distance frequencies. Now I pick up stuff allot further than when I didn’t have the filter.