WillB
Member
Trying to program the side keys or one of the front keys for a second function but for some reason the second function boxes are unhighlited and won't let me. Suggestions on what to check.
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
2180 Programming question
- Thread starter WillB
- Start date
- Status
Each button can be programmed for 2 functions. One for conventional use and one for trunking use if I remember correct.
You will need to program a button as "Function". This will then allow the second function list to be populated. You can also check the "Hold" box and get even more mileage out of your buttons. Then the problem becomes trying to remember what does what when you're using the radio.
WillB
Member
Where is the hold box at to select? I'm not seeing it under the Key function tabs.
WillB, sorry my bad. The Hold function is only available in the NX series, not the 2180.
toastycookies
Member
Is that why mine are grayed out for my TK-7360? Or is there someway I can enable them? (The "Hold" function)
toastycookies
Member
Nevermind I just answered my own question.
- Status
