SDS100/SDS200: 3 New Carrying Cases "Coming Soon"

[trp2525]

FYI for those who may have been waiting for these, Scanner Master has posted on their website that they have 3 new cases for the SDS100 "Coming Soon." Here are the direct links to the 3 new cases:

SDS100 Nylon Case/Swivel Belt Clip $26.95 (Product Code: 01-581998): https://www.scannermaster.com/SDS100_Uniden_Nylon_Case_Swivel_Belt_Clip_p/01-581998.htm

SDS100 Soft Leather Case/Swivel Belt Clip $32.95 (Product Code: 01-581999): https://www.scannermaster.com/SDS100_Uniden_Soft_Leather_Case_Swivel_Belt_Clip_p/01-581999.htm

SDS100 Hard Leather Case/Swivel Belt Clip $36.95 (Product Code: 01-582000): https://www.scannermaster.com/SDS100_Uniden_Hard_Leather_Case_Swivel_Belt_Clip_p/01-582000.htm

NOTE: If you prefer the genuine Uniden A28100B nylon carrying case (which has a cutout opening in the back of the case and uses the original Uniden belt clip that comes with the SDS100) you can purchase it from Bearcat Warehouse for $24.95: https://www.bearcatwarehouse.com/accessories/uniden-sds100-nylon-carrying-case

 

[scannermike11]

cases are great but we some kind of new battery Uniden
this battery problem need to be fixed before i buy and i am not alone here

 

[TailGator911]

Thanks for that heads up and the link. Sure wish they would have included a sideways profile shot of the case on the scanner so we could see how far that badonkadonk is going to stick out with the Kardashian battery

JD
kf4anc

PS: I would opt for the hard leather case. There is probably going to be a gap behind the upper portion of the scanner. I suppose that would be a good place to stash your QK cheat sheet.

 

[trp2525]

As an addendum to my post #1 above, I checked on the shipping charges for shipping a scanner case from Scanner Master and from Bearcat Warehouse. For Scanner Master the lowest shipping charge option I found for shipping a scanner case was $7.80 for USPS Priority Mail and for Bearcat Warehouse it was $7.95 for "Flat Rate Shipping."

Also Scanner Master charges sales tax only on orders sent to Massachusetts (6.25%) and Bearcat Warehouse charges sales tax only on orders sent to Maryland (6%).

Below the first 3 pictures from top to bottom show the 3 new cases from Scanner Master. From top to bottom are the Scanner Master Nylon, Soft Leather and Hard Leather cases. Pictures 4 and 5 with the black borders show the genuine Uniden A28100B nylon case (with the cutout opening in back to accommodate the Uniden factory belt clip) that is currently available from Bearcat Warehouse.

 

[trp2525]

FYI Scanner Master has now added a complete list of the features of their 3 new carrying cases for the SDS100 and they are still listed on the website as "Coming Soon." Note that all 3 cases feature "Ventilation ports to prevent overheating."

Hard Leather Case Product Code 01-582000 $36.95
Ventilation ports to prevent overheating
Cutouts for the USB ports and side buttons
Super strong hard leather construction with stiff rear panel for maximum protection
Bungee strap with snap to retain the radio in the case
Swivel belt clip for easy removal from belt clip and secure retention
Plastic cover to allow complete visibility of display and LED’s while protecting them from dirt and scratches
Custom made for the SDS100 with the larger battery

Soft Leather Case Product Code 01-581999 $32.95
Ventilation ports to prevent overheating
Cutouts for the USB ports and side buttons
Tough but pliable soft leather construction with stiff rear panel for maximum protection
Bungee strap with snap to retain the radio in the case
Swivel belt clip for easy removal from belt clip and secure retention
Plastic cover to allow complete visibility of display and LED’s while protecting them from dirt and scratches
Custom made for the SDS100 with the larger battery

Nylon Case Product Code 01-581998 $26.95
Ventilation ports to prevent overheating
Cutouts for the USB ports and side buttons
Tough nylon construction with stiff rear panel for maximum protection
Bungee strap with snap to retain the radio in the case
Swivel belt clip for easy removal from belt clip and secure retention
Plastic cover to allow complete visibility of display and LED’s while protecting them from dirt and scratches
Custom made for the SDS100 with the larger battery

 

[trp2525]

I just received (10-25-2018 at 12:22 PM EDT) 3 emails from Scanner Master stating that all 3 cases (nylon, soft leather and hard leather) for the SDS100 scanner are now in stock and ready to ship.

 

[Markscan]

I ordered the hard leather case today literally seconds after getting the same email.


Sent from my iPhone using Tapatalk