SDS100/SDS200: Alert lights

[kirk5056]

Is there a way to turn off the alert lights other than at the channel level?

I have had my SDS 200 for many years and I have found the alert lights of great benefit, especially when driving, to identify the active channel type. Now I also have a SDS 100 and find those alert lights to be a real pain.

If there is a way to turn those lights off at the Profile level that would allow me to keep the lights on the SDS 200 and not the SDS 100. AND more important, I am not looking forward to toggling those lights at every channel. I have over 20 favorites lists, most exceeding 200KB, so it will take time.

Thanks

 

[jtwalker]

No. Well you could put a piece of black electrical tape over light.

 

[tvengr]

Do 2 favorites lists, one with lights on and the other with lights off. Have separate profiles for the SDS100 and SDS200. Use the favorites list with the lights off for the SDS100 and the favorites list with the lights on for the SDS200.

 

[hazrat8990]

If you use ProScan, the daunting task of turning the lights off can be handled with a few mouse clicks, same goes for duplicating the favorite.