Anderson ERS-OCI

Status
Not open for further replies.

mike021361

Member
Joined
Sep 18, 2016
Messages
19
Reaction score
5
Location
Anderson, IN
Is there someone in the Madison county area who can confirm the LCN to frequency table here? I've been working with the op25 author to decode this system and he believes the problem may lie with the mappings. Link to his suggestion.

TIA
 

west-pac

Member
Joined
Nov 13, 2004
Messages
1,827
Reaction score
921
I'll see if I'm in range to monitor it this weekend.
 

west-pac

Member
Joined
Nov 13, 2004
Messages
1,827
Reaction score
921
Yes, something is wrong with the LCN freqs. LCN 5 and 10 are the same, which can't be; and also LCN 7 is the ERS control channel for the Grant county site.
 

west-pac

Member
Joined
Nov 13, 2004
Messages
1,827
Reaction score
921
LSN 5/6 is 451.7875MHz. There isn't a lot of traffic on this site today. At this rate it may take days to get it straightened out.
 

west-pac

Member
Joined
Nov 13, 2004
Messages
1,827
Reaction score
921
After monitoring for a few hours yesterday, and observing it again this morning, there are only 3 active LCNs currently.

452.4625 LCN 1/LSN 1 CC/LSN 2
451.9125 LCN 2/LSN 3/4
451.7875 LCN 3/LSN 5/6
 

scansalot52

Member
Joined
Mar 13, 2009
Messages
160
Reaction score
3
Location
Indiana
I have not noticed anyone at Anderson University carrying new radios. That's who RR says is going to be using it. No wonder you are not hearing much.
Would someone please provide specifics to program a RS P668/Whistler DMR. I've not dealt with it before.
 

west-pac

Member
Joined
Nov 13, 2004
Messages
1,827
Reaction score
921
I have not noticed anyone at Anderson University carrying new radios. That's who RR says is going to be using it. No wonder you are not hearing much.
Would someone please provide specifics to program a RS P668/Whistler DMR. I've not dealt with it before.

It's a statewide radio system that dozens of businesses use.
 

retroactiv

Member
Joined
Nov 27, 2004
Messages
360
Reaction score
6
Location
Chesterfield, IN USA
I have not noticed anyone at Anderson University carrying new radios. That's who RR says is going to be using it. No wonder you are not hearing much.
Would someone please provide specifics to program a RS P668/Whistler DMR. I've not dealt with it before.
I listen to it everyday in Anderson, and hear quite a bit. (Lifeline, Northwest Towing, Heavy Haul Trucking) It's a pretty busy system.
 

dfoutch

Member
Premium Subscriber
Joined
Dec 12, 2004
Messages
3,403
Reaction score
112
Location
Anderson, Indiana,46013
I am using the Whistler Scanner Control program to monitor this site. Sagamore : Seems they don't use TGs. "TGID/Freq Info" column shows "12902->12950" & 12950->12902" or "12952->12902" "12902->12942: ect. Any of these can show up in either TG or RID columns It will show the slot & color #. A side note: a data line shows frequency as 0.000, the TG alfatag, TG #, Rid as 'N/A" , "Slot: 256, Color: " . I think that's the command to rest. (maybe not)
 

west-pac

Member
Joined
Nov 13, 2004
Messages
1,827
Reaction score
921
I am using the Whistler Scanner Control program to monitor this site. Sagamore : Seems they don't use TGs. "TGID/Freq Info" column shows "12902->12950" & 12950->12902" or "12952->12902" "12902->12942: ect. Any of these can show up in either TG or RID columns It will show the slot & color #. A side note: a data line shows frequency as 0.000, the TG alfatag, TG #, Rid as 'N/A" , "Slot: 256, Color: " . I think that's the command to rest. (maybe not)
 

Attachments

  • Screenshot_20210820-153227_Chrome.jpg
    Screenshot_20210820-153227_Chrome.jpg
    50.6 KB · Views: 13
Status
Not open for further replies.
Top