• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Antenna mounting help

RC4

Member
Joined
Oct 16, 2021
Messages
96
Reaction score
36
Hello I was just wondering if anyone knew of anybody near the Portland Oregon area who could I contact for help with installing a base antenna professionally. Nothing really major I just don’t trust my antenna skills and don’t like heights :)
Any help would be appreciated. And money isn’t an issue. Thank you 🙏
 

mmckenna

I ♥ Ø
Joined
Jul 27, 2005
Messages
28,714
Reaction score
37,207
Location
United States
Hello I was just wondering if anyone knew of anybody near the Portland Oregon area who could I contact for help with installing a base antenna professionally.

If you want professional installation, contact a 2 way radio shop. They'll understand how to do the installation to National Electric Code, and how to properly do the entire process from end to end. If you want it done once and done right, this is the way to go. Proper grounding, lightning protection, waterproofing of the connections, etc.

I'm not from Portland, but the only shop I'm aware of up that way is Silke Communications. I work with one of their other shops and they are pretty good. There are others, though, I'm just not familiar with them.

Just make sure you have a decent antenna. Most shops are not going to warranty hobby grade equipment and might shy away from a job if it's low end equipment you want installed.

Nothing really major I just don’t trust my antenna skills and don’t like heights :)

A professional shop will be expensive, so plan accordingly. Like I said above, they'll do it right the first time and it'll last decades. Might be worth the extra cost.

Any help would be appreciated. And money isn’t an issue. Thank you 🙏

OK, money is the blocker for most.
If a professional shop does get too expensive, just about any TV/Satellite TV dealer could do it, or know someone who can.
 

slowmover

Active Member
Joined
Aug 4, 2020
Messages
4,612
Reaction score
4,612
Location
Fort Worth

.
 
Top