Best Audio Cables.

Status
Not open for further replies.

Avenger44

Member
Joined
Jun 4, 2006
Messages
0
Reaction score
0
Location
IN PA
I was wondering if anyone can tell me what the Best Audio Cable Would be . Right now I just Have some Cheap RS Audio Cable for a Live Audio Feed I have Setup . Just wondering if there is Something Better out there . Let me know . Thanks .

Avenger44 .
 
N

N_Jay

Guest
High impedance, or low impedance?
Balanced or unbalanced?
Stereo or Mono?
Single shielded or double shielded?
What length, what application, what environment?
 

Avenger44

Member
Joined
Jun 4, 2006
Messages
0
Reaction score
0
Location
IN PA
High impedance, or low impedance?
Balanced or unbalanced?
Stereo or Mono?
Single shielded or double shielded?
What length, what application, what environment?

Low Imedance , Balanced , Mono , Double Shielded , Maybe 5 or 10 Ft Length , Application is for Live Audio Feeding of Public Safety 800 MHz Trunked System to Teamspeak ans Icecast and Shoutcast Servers . Enviroment would be High RF . Other Computers and Other Trainsmitters in the Same Location as the Feed Equipment .

Avenger 44.
 
N

N_Jay

Guest
Low Imedance , Balanced , Mono , Double Shielded , Maybe 5 or 10 Ft Length , Application is for Live Audio Feeding of Public Safety 800 MHz Trunked System to Teamspeak ans Icecast and Shoutcast Servers . Enviroment would be High RF . Other Computers and Other Trainsmitters in the Same Location as the Feed Equipment .

Avenger 44.
Belden 1812 if I recall correctly.

But probably does not matter much.
 

Avenger44

Member
Joined
Jun 4, 2006
Messages
0
Reaction score
0
Location
IN PA
Belden 1812 if I recall correctly.

But probably does not matter much.


Ok , Copy . Hast to be Something better out there than Radio Shack Junk , lol . The Old RS Does not have the Good Stuff Like they Used to anymore .

Avenger44.
 
N

N_Jay

Guest
Ok , Copy . Hast to be Something better out there than Radio Shack Junk , lol . The Old RS Does not have the Good Stuff Like they Used to anymore .

Avenger44.

Are you having a problem?

My guess is any shielded twisted pair will do the job.
 

Avenger44

Member
Joined
Jun 4, 2006
Messages
0
Reaction score
0
Location
IN PA
Are you having a problem?

My guess is any shielded twisted pair will do the job.


ok , I have 2 Audio Feeds up and Running . About every 2 to 3 Months I haft to Replace the Audio Cable . This is the Cable that Go's from your Feed Radio to the Line In Jack on your Computer Soundcard .
I am Also Looking into New Sound Cards for the Computers . But the Main Problem is the Audio Cable .

Avenger44
 

wlmr

Member
Joined
Apr 26, 2004
Messages
422
Reaction score
5
About every 2 to 3 Months I haft to Replace the Audio Cable . This is the Cable that Go's from your Feed Radio to the Line In Jack on your Computer Soundcard .

Avenger44

? ? ?

Unless you're constantly connecting/disconnecting the cable (or jumping rope with it) cable normally doesn't go bad. Why are you having to replace the cable?
 

Avenger44

Member
Joined
Jun 4, 2006
Messages
0
Reaction score
0
Location
IN PA
? ? ?

Unless you're constantly connecting/disconnecting the cable (or jumping rope with it) cable normally doesn't go bad. Why are you having to replace the cable?

I don't do anything with the Cable . I get it , Connect it to the Radio and Computer Sound Card Line In Jack and Walk Away . Plus I'm Looking for A Better Cable Because the Audio Feeds are Setup Near High Power Trainsmitters and Other Devices .

Avenger44 .
 
Last edited:

Audiodave1

Member
Database Admin
Joined
Dec 27, 2001
Messages
1,983
Reaction score
272
Location
Chadds Ford, PA
Since your sound card (and scanner output) are not a balanced line don't worry about that. A good braided shielded cable will work just fine. As for keeping the RF out, be sure to properly ground the chassis of all gear.
 

Zon

Member
Joined
Nov 16, 2008
Messages
0
Reaction score
0
Location
Algoma
Exactly!!

I use ok cables...stuff you can buy at shack...my cable too are like 10 yrs old...and the whole time I ran a server , I had no probs cable wise...I dunno what to tell ya


wow, Im still using the same cables I bought several years ago through Radio Shack. never had any go out on me.
 

prcguy

Member
Joined
Jun 30, 2006
Messages
18,890
Reaction score
15,319
Location
So Cal - Richardson, TX - Tewksbury, MA
You mentioned balanced but most computer sound cards are unbalanced as in 1/8" stereo plugs. If RF is getting into your audio its probably not from inadequate shielding, its more likely common mode currents traveling on the outside of the cable. Wrapping lots of turns around a ferrite core at each end can help as well as transformer coupling into the sound card. Some cheap plated audio connectors corrode easily and will make intermittent connection. Deoxit from Caig Labs will fix this.
prcguy
 

Avenger44

Member
Joined
Jun 4, 2006
Messages
0
Reaction score
0
Location
IN PA
Cable Problem taken care of . No more Problem . Thanks all hew Responded .

Avenger44.
 
Status
Not open for further replies.
Top