Cdm 1250 rss

[jmjlimited]

I'm trying to program several CDM1250 and with the MDC Call list being kinda Long, would like to basically clone them, is this possible, everytime I try to just program them Like I would any other Motorola Mobile, it tells me it can't.

Thanks

 

[k4sgt]

It should tell you why you can't. Most likely you have different model radios (sub model or version) and/or different feature sets and the CPS recognizes this and won't clone the "model number mismatch". Check the model numbers on the labels. If they are exact then you should be able to clone them. Also, there is no dedicated clone feature in the professional series CPS. You are doing it correctly when you just use the write to radio button.

 

[davidgcet]

if the model numbers are different you should still be able to open the CPS 2x. in one have your master template, in the other read the radio to be programmed. then drag and drop the info over.

 

[fineshot1]

if the model numbers are different you should still be able to open the CPS 2x. in one have your master template, in the other read the radio to be programmed. then drag and drop the info over.

Drag & Drop is not supported on the Professional Series programing software, and yes that sucks.

 

[davidgcet]

well crap, i new you could do it within a single codeplug. just checked and you are correct that D/D does not work codeplug to codeplug. i done got too used to the APX radios!

 

[gary123]

Its a differant feature set. Unfortunatly you have to do it the hard way. I just checked it using 6.11.05 with 2 different feature sets and was not able to C&P a test file.