CHP Khaki CTCSS/PL Tone Change

[Radiobern]

I was driving in the Dublin/Pleasanton/Livermore area yesterday and noticed the CTCSS/PL tone may have changed. I have 44.94 MHz with CTCSS 114.8 Hz programmed into my Motorola HT1250 and would not unmute. I do have a monitor button programmed so I could hear it when unmuted. I did not have a scanner with me to read the CTCSS tone off the air. Khaki is too weak for me to decode the CTCSS tone here at my house. Anyone elese notice a change?

K6KBL/WRQD400

 

[Radiobern]

I was driving in the Dublin/Pleasanton/Livermore area yesterday and noticed the CTCSS/PL tone may have changed. I have 44.94 MHz with CTCSS 114.8 Hz programmed into my Motorola HT1250 and would not unmute. I do have a monitor button programmed so I could hear it when unmuted. I did not have a scanner with me to read the CTCSS tone off the air. Khaki is too weak for me to decode the CTCSS tone here at my house. Anyone elese notice a change?

K6KBL/WRQD400

I just picked up the Khaki with a scanner near work and it is showing 114.8. I double checked my HT1250 and it is programmed correctly. I’ll bring both the HT1250 and scanner on my next break to check.

K6KBL/WRQD400

 

[kma438]

The Khaki must be down. Also using the HT1250. Haven't had any broadcasts in the last 24hrs. Seems they are dispatching 118 units on the Aqua. Also I'm unable to monitor Bronze from Tri-Valley. CHP must have reduced power output or redirected microwave dish.