• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Comms fail 0101 in AES 7705i Receiver

B

bcoleman1

Member
Joined
May 11, 2025
Messages
16
Reaction score
1
Location
Dublin, Ireland
Hi All
Hope all is well. Have a secondary AES2 unit at a radio repeater site and have a comms fail 0101 on the display front.
I tried to power cycle the unit, however the same message comes back after a short matter of time 30mins..
Any ideas if any way to resolve this issue? I tried a remote session call with AES tech support, after a 2nd call they now think the unit has a faulty power supply/hard drive.
It is discontinued or out of support with the vendor as of Dec 31, 2024.
 
B

bcoleman1

Member
Joined
May 11, 2025
Messages
16
Reaction score
1
Location
Dublin, Ireland
+ I do not believe it is false error on the display as the domino effect it has knocked our main mesh repeater at the site to a down state. backup repeater is working okay. Main mesh repeater getting ac power from the AES 7705i unit.
 
T

TampaTyron

Beep Boop, Beep Boop
Joined
Feb 1, 2010
Messages
1,242
Reaction score
532
Location
Phoenix, AZ
I do not think many folks run those units near me (in the USA). I have only been in radio a coulple of decades and have not seen that equipment in use here in the US.

TT
 
You must log in or register to reply here.

Similar threads

B
  • Locked
Ateargo Kenwood Model Repeater stopped receiving several RMA alarm signals since April 1st, 2025
Replies
0
Views
228
bcoleman1
B
S
  • Locked
Trunking Protocols
Replies
3
Views
8K
senss
S
Top