DSD+ ver. 1.074

[N8DRC]

Hello,
I have a question regarding DSD+ build 1.074. Does it follow a Con+ UHF Trbo trunking system? I have looked everywhere for the last 3 days on this question and didn't come up with anything either I am missing it or?

I have a 6 frequency UHF CON+ programmed in my PSR-800, if I sit on the CC it I only get audio from the first channel after the CC and it also shows the wrong CC in the channel activity window. Audio sounds great, if I only scan the voice channels it will show in the activity window S1 and S2 no frequency.

The photo is what it shows when parked on the CC, I only get audio form channel 2.

The frequencies are,

01 462.02500c
02 463.31250
03 464.01250
04 464.06250
05 464.10000
06 464.17500

Thanks!

 

[RayAir]

Hello,
I have a question regarding DSD+ build 1.074. Does it follow a Con+ UHF Trbo trunking system? I have looked everywhere for the last 3 days on this question and didn't come up with anything either I am missing it or?

I have a 6 frequency UHF CON+ programmed in my PSR-800, if I sit on the CC it I only get audio from the first channel after the CC and it also shows the wrong CC in the channel activity window. Audio sounds great, if I only scan the voice channels it will show in the activity window S1 and S2 no frequency.

The photo is what it shows when parked on the CC, I only get audio form channel 2.

The frequencies are,

01 462.02500c
02 463.31250
03 464.01250
04 464.06250
05 464.10000
06 464.17500

Thanks!

That version won't follow the trunking.
V 1.080t and 1.092 will.

They require a bit more set up and a subscription to the DSD Fast Lane.

 

[RayAir]

That version won't follow the trunking.
V 1.080t and 1.092 will.

They require a bit more set up and a subscription to the DSD Fast Lane.

I like to take the info from DSD and program up a DMR radio and use that on a Con+.

 

[DSDPlus]

Hello,
I have a question regarding DSD+ build 1.074. Does it follow a Con+ UHF Trbo trunking system? I have looked everywhere for the last 3 days on this question and didn't come up with anything either I am missing it or?

Versions 1.080+ will follow Con+ systems.

I have a 6 frequency UHF CON+ programmed in my PSR-800, if I sit on the CC it I only get audio from the first channel after the CC and it also shows the wrong CC in the channel activity window. Audio sounds great, if I only scan the voice channels it will show in the activity window S1 and S2 no frequency.

DSD+ can not determine voice channel numbers unless you are using the 1.080+ trunking version and its specific monitoring procedure.

The photo is what it shows when parked on the CC, I only get audio form channel 2.

The frequencies are,

01 462.02500c
02 463.31250
03 464.01250
04 464.06250
05 464.10000
06 464.17500

DSD+ assigns channel numbers to each time slot, so your RF channel numbers should be 1, 3, 5, 7, 9, 11. The DSD+ documentation explains this.

 

[N8DRC]

Thanks guys that is the info I needed...I will get the upgraded version, this program is great!

 

[W4KRR]

DSD+ assigns channel numbers to each time slot, so your RF channel numbers should be 1, 3, 5, 7, 9, 11. The DSD+ documentation explains this.

So each channel must be entered twice, once for each time slot, like this:

Cap+, 0, 0, 1, 462.45000, 467.45000, 0
Cap+, 0, 0, 2, 462.45000, 467.45000, 0
Cap+, 0, 0, 3, 461.73750, 466.73750, 0
Cap+, 0, 0, 4, 461.73750, 466.73750, 0
Cap+, 0, 0, 5, 451.82500, 456.82500, 0
Cap+, 0, 0, 6, 451.82500, 456.82500, 0

Is this correct? It seems to work for me like the way it is here. Except that sometimes the program will get confused if I'm holding on a talkgroup and there is another conversation taking place on the other time slot on the same freq. I.E., it will sometimes pass audio from a talkgroup not being held on.

 

[DSDPlus]

So each channel must be entered twice, once for each time slot, like this:

Cap+, 0, 0, 1, 462.45000, 467.45000, 0
Cap+, 0, 0, 2, 462.45000, 467.45000, 0
Cap+, 0, 0, 3, 461.73750, 466.73750, 0
Cap+, 0, 0, 4, 461.73750, 466.73750, 0
Cap+, 0, 0, 5, 451.82500, 456.82500, 0
Cap+, 0, 0, 6, 451.82500, 456.82500, 0

Once for each RF channel. Pick one of the two timeslots, does not matter which one. So:

Cap+, 0, 0, 1, 462.45000, 467.45000, 0
Cap+, 0, 0, 3, 461.73750, 466.73750, 0
Cap+, 0, 0, 5, 451.82500, 456.82500, 0

Except use real network ID and site number, not zeroes.

Is this correct? It seems to work for me like the way it is here. Except that sometimes the program will get confused if I'm holding on a talkgroup and there is another conversation taking place on the other time slot on the same freq. I.E., it will sometimes pass audio from a talkgroup not being held on.

Sounds like you have not disabled audio synthesis in the CC copy of DSD+.

 

[W4KRR]

Sounds like you have not disabled audio synthesis in the CC copy of DSD+.

Here is my CC.bat file:

DSDPlus -rc -i20001 -v3 -wsl658.78 -wss100.200 -wel428.399 -wcl14.965 -wes400.520 >>CC.log

What would I add to disable audio synthesis? Would that also affect NXDN monitoring?

 

[DSDPlus]

Use -1

It blocks voice synthesis of the second timeslot.

It has no effect on NXDN. There are no timeslots on NXDN.

 

[W4KRR]

Use -1

It blocks voice synthesis of the second timeslot.

It has no effect on NXDN. There are no timeslots on NXDN.

Does it matter where the -1 goes in the line?

 

[DSDPlus]

No, it does not matter, but just change -rc to -rc -1 as they both relate to CC monitoring behavior, so they might as well be together.