Everett area help

[Hover_X]

I have a Pro97 and got it programmend last November and it was working great through early February. I have not used it since early February and now it does not appear to receive any of my trunked channels. Did something change, or is it my scanner programming?

I thought the control frequencies may have changed, so I added all the 800 freqs in the Bank, but it still is not working.

If I set the 800 freqs to FM instead of MO, they receive during a scan, but of course there are no talk groups associated with the reception. When I cange the freqs to MO and scan I get nothing. So this would indicate that the frequencies that I have programmed are correct. What may be wrong?

Please help.

 

[AtomicTaco]

That's kind of weird... double check to make sure you don't have all the talkgroups locked out, and maybe try open mode just in case.

 

[Hover_X]

Thanks for the reply AT. I have tried Open mode and the results are the same. I have also verified that the talkgroups are not locked out. Any other suggestions? This is quite frustrating!!!

 

[Hover_X]

Trunking resolved!

Well, it appears to be working now. As I suspected it was a case of operator error... doh!

It appears that I had inadvertently locked out one or more of the control channels.

As always, thanks for the responses.

Dan