Yaesu: FTM-300DR SD card

[KE4RDD]

I have a FTM-300DR. W hen I first got the radio I programmed about 30 or so repeaters into the memory without software. I have since purchased an SD card. I put the card into the radio, formatted the SD card, and then read the radio onto the SD card.
I took the SD card inside downloaded the information to my software (RTsystems) and added several repeaters/channels.
When I put the SD card back in the radio and write to the radio from the SD card none of the new repeaters/channels show up.
Any ideas?

 

[RBMTS]

Maybe. The FTM-400XDR has this problem. Don't ask me why but for some reason the radio may not like uploads and downloads from the SD card **IF** the beep sound setting was turned off in settings. This drove me crazy for a while until I stumbled across the glitch on one of the radio forums. Sure enough, uploads and downloads to the SD card worked fine when I turned the beep setting on. Maybe see if that changes anything on the FTM-300. Just a thought.

Also make sure that you have the power off when you insert the SD card. The radio should be powered up with the card already inserted.

 

[KE4RDD]

I have a FTM-300DR. W hen I first got the radio I programmed about 30 or so repeaters into the memory without software. I have since purchased an SD card. I put the card into the radio, formatted the SD card, and then read the radio onto the SD card.
I took the SD card inside downloaded the information to my software (RTsystems) and added several repeaters/channels.
When I put the SD card back in the radio and write to the radio from the SD card none of the new repeaters/channels show up.
Any ideas?

Figured out my mistake! Problem solved.

 

[vagrant]

You should share the error so that others can learn.

Figured out my mistake! Problem solved.

 

[RockyBennett]

Figured out my mistake! Problem solved.

I own a Yaesu 300, what was the problem. Please share.

 

[RockyBennett]

You should share the error so that others can learn.

I guess that the OP thinks that the answer should be kept a secret instead of sharing it with the world.

 

[vagrant]

My guess is the OP programed one side. If you have the latest firmware for the 300, you should be good. A buddy just purchased one and has zero issues.