I'm going to be moving to GC in August and was wondering if there are any issues with using my BCD996XT with the trunked system? Read through some of the posts but didn't seem like it would be an issue. It has the most recent firmware upgrade as well. Thanks.
Great to hear!, what brings you to the area?..as Larry stated before me, yes what you have should do nicely, as Glynn County has still not migrated full time to the SEGARRN, with the exception of Public Works and the GA Port Authority Police. The majority, if not all, Glynn County services still use the analog smartnet system. To include Glynn County PD, S/O, and FD..Brunswick PD, FD..GA State Patrol and so on. When you get here you will want to plug in 854.8375, 856.0125, and 857.4375 as your system frequencies, as those are the three main freqs the system alternates through almost daily for the control channel. The TG's on the county page are fairly accurate, though some are slightly off and have inaccurate descriptions, I work in Glynn County so I have had plenty of time to do my homework on the system. I would recommend going into your settings and also switching "ID scan" to "ID search" as this will show unprogrammed and programmed TG's and broadcast the traffic on them, as I have noticed some TGs have popped up in the past that were not on the database.
I would also recommend going ahead and putting in the Glynn County SEGARRN site just so your ready for the switch over and you can hear the port authority police and the GSP units out of the Hinesville and Rincon posts, 772.5562 is the constant control channel freq. I would recommend also putting in the conventional GSP VHF hi-band frequencies, as there are two GSP posts in the county, on Jekyll Island and in Brunswick. Even though the Brunswick and Jekyll posts primarily communicate on the Glynn County TRS, they do have the ability to utilize the VHF band if they wish, or move outside of Glynn County a good ways to where they don't receive the tower for the 800. If you have any further questions, feel free to ask!