KJ4TND
Member
I have a GR300 repeater with 2 Motorola Radius GM300 and a Motorola Rick. When I turn the rick on to activate the repeater function my cor light stays on, but does not transmitt. All forums I have read have said that the cor light is supposed to come on when the repeater is repeating only. The rick is setup for unidirectional opperation. When I key a radio up on the frequencies it repeates like normal however there is a very low tone in the background. I also hear it coming from the recieve radio. But when I turn off the rick I do not hear the low tone. I use motorola rss 4.00.00. My pin assignmests are as follows:
RX radio:
#4 External Alarm output no debounce high
#6 Null 1 input no debounce high
#8 PL/DPL & CSQ detect output no debounce low
#9 Emergency Switch input yes debounce high
#12 Null 1 input no debounce high
#14 Null 1 input no debounce high
TX Radio
#4 Null 2 output no debounce high
#6 Null 1 input no debounce high
#8 Null 1 input no debounce high
#9 Emergency Switch input yes debounce high
#12 Null 1 input no debounce high
#14 Null 1 input no debounce high
The RICK dip switches are #3 on #5 on and #9 on the others are off.
Does anyone see what may be wrong. Any help would be great.
RX radio:
#4 External Alarm output no debounce high
#6 Null 1 input no debounce high
#8 PL/DPL & CSQ detect output no debounce low
#9 Emergency Switch input yes debounce high
#12 Null 1 input no debounce high
#14 Null 1 input no debounce high
TX Radio
#4 Null 2 output no debounce high
#6 Null 1 input no debounce high
#8 Null 1 input no debounce high
#9 Emergency Switch input yes debounce high
#12 Null 1 input no debounce high
#14 Null 1 input no debounce high
The RICK dip switches are #3 on #5 on and #9 on the others are off.
Does anyone see what may be wrong. Any help would be great.