Help programming Pro-96

[Bonkk083]

I programed only the CC for a 800 P25 system but I'm not picking up anything my Pro-197 picks up and they sitting beside each other, I changed the 3600 baud reband on Win96 that didn't help, Are am I missing something

 

[tvengr]

P25 is 9600. Are 3600 and 9600 both set to Normal? You cannot use the Tinker Creek site. The PRO-96 cannot trunk track 700 MHz frequencies. Try entering all 4 of the control channel capable frequencies in the Union 800 MHz site. They may have switched to an alternate.

2 (2)

087 (57)

Union

Union

851.750

852.2875c

852.800c

853.075c

853.450c

The PRO-96 is prone to frequency drift on 800 MHz frequencies. You may need to adjust VR4 inside the scanner to get it to work.

 

[Bonkk083]

P25 is 9600. Are 3600 and 9600 both set to Normal? You cannot use the Tinker Creek site. The PRO-96 cannot trunk track 700 MHz frequencies. Try entering all 4 of the control channel capable frequencies in the Union 800 MHz site. They may have switched to an alternate.

2 (2)

087 (57)

Union

Union

851.750

852.2875c

852.800c

853.075c

853.450c

The PRO-96 is prone to frequency drift on 800 MHz frequencies. You may need to adjust VR4 inside the scanner to get it to work.

What is vr4