Dvfd9015
Member
My home Patrol 2 will not pick up properly my local fire department it just went to the phase 2 of the Motorola system trying to figure out why I can't pick everything up can anyone help
HP-2: Home Patrol 2 reception problem
- Thread starter Dvfd9015
- Start date
- Status
We need some additional information in order to provide assistance.
What is your location? City (or county) and state would be sufficient.
And, what system are you trying to monitor?
Welcome to the RR forums @Dvfd9015
I'll take a stab in the dark and say simulcast distortion based solely on the fact you said the system is Phase-II but no way to tell for sure unless you provide the RRDB link to said system. Any scanner that is not a Uniden SDSx00 is prone to suffer its effects. Other possibilities: Disabled service types, encryption, avoids but very little need to consider these unless you rule out the first possibility...
I'll take a stab in the dark and say simulcast distortion based solely on the fact you said the system is Phase-II but no way to tell for sure unless you provide the RRDB link to said system. Any scanner that is not a Uniden SDSx00 is prone to suffer its effects. Other possibilities: Disabled service types, encryption, avoids but very little need to consider these unless you rule out the first possibility...
Last edited:
- Joined
- Jun 30, 2020
- Messages
- 2,019
- Reaction score
- 2,585
With the switch to Phase II did they 'upgrade' to simulcast?
- Status
