How to program a specific talk group on an RS Pro-652?

Status
Not open for further replies.

rgross999

Member
Premium Subscriber
Joined
Feb 21, 2015
Messages
2
Reaction score
0
I just got my first scanner, an RS Pro-652 and cannot figure out how to program a specific talk group on a trunked system.

The trunked system is the Allied Radio Matrix for Emergency Response for Minnesota, found at Allied Radio Matrix for Emergency Response (ARMER) Trunking System, Various, Minnesota - Scanner Frequencies.

About 2/3 down the page is a section called "Hennepin County - Minnetonka Talkgroups".

In this section is a line with DEC =10788, HEX = 2a24, Mode = D, Alpha Tag = MTKA PD DISP, Description = Police Dispatch and Tag = Law Dispatch.

What must be entered into the scanner in order to listen to this?

Thanks.
 
R

retiredmich

Guest
If your programing manualy, there are 14 steps to follow. If you use Soft Ware, follow direction.
 

dukedass

Member
Premium Subscriber
Joined
Feb 16, 2015
Messages
2
Reaction score
0
cant get my pro 652 to upload from computer to scanner can anyone give me some advise
 

dukedass

Member
Premium Subscriber
Joined
Feb 16, 2015
Messages
2
Reaction score
0
Am using cables and radio reference but what I found out was to use different scanner software to program which radio reference doesn't tell you. Once I did use different software it downloaded fine. Is there any other scanner software you can use to program with? Just curious might want other items to scan. Thanjs
 
Status
Not open for further replies.
Top