• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Hytera Group Call Codes

Status
Not open for further replies.
Sputnik1

Sputnik1

Member
Joined
Jun 16, 2009
Messages
58
Reaction score
3
Location
Kettering - Northants - UK
Hello all

does anyone know if it is possible to set up a PD782 / 785 in order to sniff and display
incoming unknown Group Codes ?

Im looking for a way to identify user groups on a system where the frequency and colour codes are known
but the group codes aren't and we dont have access to the handsets concerned.

Im thinking that putting thousands of potential group codes into the contact list is a non starter :-(

any ideas gratefully received

regds

Sputnik
 
IAmSixNine

IAmSixNine

Member
Feed Provider
Joined
Dec 19, 2002
Messages
2,530
Reaction score
707
Location
Dallas, TX
Several uniden scanners will do DMR.
Using that as a tool to identify talk groups is much more efficient.
 
Sputnik1

Sputnik1

Member
Joined
Jun 16, 2009
Messages
58
Reaction score
3
Location
Kettering - Northants - UK
Hello Guys

this approach probably doomed for the time being but all now sorted as Ive invested in a CS580 for my
toolbox and its perfect :)

Thanks for taking the time to reply

all the best

Sputnik
 
Status
Not open for further replies.

Similar threads

KD7DDC
  • Locked
SLVSA - Salt Lake Valley Scanner Alerts (New Group)
Replies
1
Views
2K
KD7DDC
KD7DDC
Top