• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Hytera MD782 G

E

Efengler

Newbie
Joined
Apr 1, 2024
Messages
4
Reaction score
0
I was given a hytera MD782 G VHF.
I was able to get in contact with a dealer who was able to give me the software needed to upgrade the firmware on the radio, and a version of CPS that could read and write that firmware

The dealer also gave me a code plug that I could edit my own information onto and upload to the radio

What I think I have discovered is that either the code plug that I was given somehow has TX disabled or my radio itself may have TX disabled in someway.

I can set another ham radio to the exact same frequency that the hytera should be broadcasting on and the other radio won’t pick anything up.

I’m wondering if anybody has any advice or what to do and I’m also wondering if anybody has a different code plug that I could try possibly even a blank code plug from a dealer.

Any help would be greatly appreciated.

I’m thinking maybe there’s a setting somewhere I could change to get TX to work or maybe something like that that I’m missing.
 
E

Efengler

Newbie
Joined
Apr 1, 2024
Messages
4
Reaction score
0
I’ll get screenshots when I can but even with no tones programmed at all on either radios I get only one way communication. The hytera can receive very well and transmit nothing at all. The LED goes red but that’s it.
 
V

VK2TPD

Member
Joined
Jan 29, 2025
Messages
6
Reaction score
0
Location
NSW Australia
The code plug you were will only be a sample for you to edit. Are you having this issue on analogue or DMR? If it is only on analogue check that TX inhibit is not ticked.

Pete VK2TPD
 
You must log in or register to reply here.

Similar threads

LynxVortex
NX-3300 Trying to build DIY programming/accessory cable
Replies
6
Views
348
AM909
A
WRMF742
  • Solved
Analog Motorola Channel Sounding Digital and Displaying Unit IDs?
Replies
7
Views
535
dryfb
dryfb
E
Ameritron ALS 600
Replies
2
Views
450
prcguy
prcguy
J
Radioshack Pro-107
Replies
1
Views
584
fourwd1
F
W
XPR 5580 CPS VERSION
Replies
5
Views
307
N4KVE
N
Top