I'm using the RTL-SDR with the SDR Sharp program. I have installed the plugin for the Frequency Manager + Scanner. It seemed to be loaded properly but on the FM-Scan window. The lower portion of the control panel is missing. Could some one please point me in the right direction to fix this? Thanks.
I seem to be missing something.
- Thread starter daveo89
- Start date
OP showing a floating window where as yours is docked.
@daveo89 does that do the same when docked and not floating?
It shows the same thing when docked.
Run the sdrsharp.dotnet9.exe
Ran it on "dotnet9" and got the same thing. I also tried it floating and docked.
What is your screen resolution set to? Wonder if the programs maybe scales it down or something.
It's set at 1600x900. But I saw something on another thread about it and tried a few other settings with no change. I am running the current version of SDR sharp, v1921, and I wonder if an earlier version would suit the plugin better. I'm going to look them up and try that. Thanks for the info.
After much reading on this site and playing around with many versions of SDR#, I settled on getting the scanner to work properly with all the buttons. It goes like this: SRD# v1921, dotnet 8. The scanner version is v2.4.4.0. This is on a "Windows 11 machine with a RTL-SDR dongle. It was quite a journey but most of all, I learned a lot. Thanks to all for their help.
I had the same issue so I tried running the dotnet8 version and it had me download another .net file then i ran it again and it gave me some errors but it still came up and the scanner-manager window was sized correctly. I quit and ran it on the dotnet9 version and it was fixed.
