Kaufman County

Status
Not open for further replies.

tsalmrsystemtech

Active Member
Premium Subscriber
Joined
Nov 19, 2008
Messages
1,617
Can somebody give me the channel spacing ID's for this system. Its a phase II TDMA system. Also, is this a Motorola system or Harris System

Thanks
 

mwjones

Member
Premium Subscriber
Joined
Apr 9, 2003
Messages
735
Location
Van Alstyne, TX
Can somebody give me the channel spacing ID's for this system. Its a phase II TDMA system. Also, is this a Motorola system or Harris System

Thanks
Here's what was captured by me in DSDPlus a while back.

Network: 926D5.00A ; Kaufman County, Texas

Bandplan #0: Base=769.00000 Offset=+30 Spacing=6.25 BW=12.5
Bandplan #8: Base=769.00000 Offset=+30 Spacing=6.25 BW=12.5 Slots=2


Site: 10.10 NAC=00A ; Simulcast

Channel 0-47: 769.29375 SCC VOICE DATA
Channel 8-94: 769.29375-1 VOICE
Channel 8-95: 769.29375-2 VOICE
Channel 0-347: 771.16875 SCC VOICE DATA
Channel 8-694: 771.16875-1 VOICE
Channel 0-427: 771.66875 CC
Channel 0-495: 772.09375 SCC VOICE DATA
Channel 8-990: 772.09375-1 VOICE
Channel 0-545: 772.40625 SCC VOICE DATA
Channel 8-1090: 772.40625-1 VOICE
Channel 8-1091: 772.40625-2 VOICE
Channel 0-607: 772.79375 SCC VOICE DATA
Channel 8-1214: 772.79375-1 VOICE
Channel 8-1215: 772.79375-2 VOICE


Based on the fact that all channels are listed as Control Channels, and the SysID/WACN, I would say it's a Harris system.

Premium subscribers to RadioReference can see the bandplan information under each site (if it has been submitted, which Kaufman has).
 

riverradio68

Member
Feed Provider
Joined
Jul 19, 2019
Messages
489
Quick question on Kaufman, I was in Hunt Regional Greenville last week for a week. I could not pick up any Kaufman Co. control channels, Got Rockwall, Collin and even Dallas well, just no Kaufman. Do they just have weak CC's?
 

Project25_MASTR

Millennial Graying OBT Guy
Joined
Jun 16, 2013
Messages
4,431
Location
Texas
Here's what was captured by me in DSDPlus a while back.

Network: 926D5.00A ; Kaufman County, Texas

Bandplan #0: Base=769.00000 Offset=+30 Spacing=6.25 BW=12.5
Bandplan #8: Base=769.00000 Offset=+30 Spacing=6.25 BW=12.5 Slots=2


Site: 10.10 NAC=00A ; Simulcast

Channel 0-47: 769.29375 SCC VOICE DATA
Channel 8-94: 769.29375-1 VOICE
Channel 8-95: 769.29375-2 VOICE
Channel 0-347: 771.16875 SCC VOICE DATA
Channel 8-694: 771.16875-1 VOICE
Channel 0-427: 771.66875 CC
Channel 0-495: 772.09375 SCC VOICE DATA
Channel 8-990: 772.09375-1 VOICE
Channel 0-545: 772.40625 SCC VOICE DATA
Channel 8-1090: 772.40625-1 VOICE
Channel 8-1091: 772.40625-2 VOICE
Channel 0-607: 772.79375 SCC VOICE DATA
Channel 8-1214: 772.79375-1 VOICE
Channel 8-1215: 772.79375-2 VOICE


Based on the fact that all channels are listed as Control Channels, and the SysID/WACN, I would say it's a Harris system.

Premium subscribers to RadioReference can see the bandplan information under each site (if it has been submitted, which Kaufman has).

Fun fact, P25 control channels will actually advertise what's called a Manufacturer ID which correlates to the manufacturer of the system. What I don't know is how that is handled when mixing infrastructure (i.e. Johnson controller with Tait repeaters). Unitrunker can decode it and I believe ProCom96 will decode it as well.
 
Status
Not open for further replies.
Top