• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

LPE Flash & DSP Issue

Status
Not open for further replies.
rmiles

rmiles

Member
Premium Subscriber
Joined
Jul 12, 2003
Messages
251
Reaction score
10
I have three LPE's I'm attempting to perform a recovery on but my Flash & DSP libraries aren't as complete as I thought. The first is a KRD 103 103/A104 which contains the ROA1172212 board C50 DSP. I have Group 17 flash code but not the hk3r01a DSP. However, according to Tech-Link, DES encryption is not supported after group six flashcode in the Prisum-HP & LPE model radios with C50 microprocessors so it would stand to reason that I would need a group 6 flashcode to properly operate with hk3r01a? This radio is featured for Aegis and DES, I just need the proper flash/DSP combo.

The other two radios are both KRD 103 103/A204 and contain the C56 microprocessor board. These radios are both featured for Aegis and PV as well as DES and should take the group 17 flash I have just fine but I don't have the i6r06d01 DSP.
 
rmiles

rmiles

Member
Premium Subscriber
Joined
Jul 12, 2003
Messages
251
Reaction score
10
Thanks!! Still in need of the proper flash/DSP for the C50 unit if anyone has it.
 
Status
Not open for further replies.

Similar threads

RayAir
  • Locked
Digital voice issue Jaguar 700P
Replies
3
Views
854
merlin
merlin
nyplumma
  • Locked
F-35 AVIONICS
Replies
7
Views
13K
littona
littona
V
  • Locked
Unblocking the YAESU FRG-8800 Frequency Coverage Limitations
Replies
1
Views
2K
midwestsw
midwestsw
R
  • Locked
I can't find my feature code menu LPE-200
Replies
3
Views
1K
ElroyJetson
ElroyJetson
Coverted
  • Locked
MACom LPE-200 Purchase Decision
Replies
7
Views
3K
VE3RADIO
V
Top