LTR Standard

[RESCUE4NFD]

I have a BC 780XLT and I'm trying to track a LTR Standard / analog System.The problem I'm having is when the scanner is scan searching the ID #'s appear on the screen but NO voice.If I stop the scan search and put the scanner on a LCN Freq.the ID #'s appear and there is audio.I've checked the LCN#'s and there are in order and the RR Database has checked an said they are correct.What am I doing wrong?

 

[RoninJoliet]

On the Uniden 898T you have to set the "bank" to LTR and make sure the little "L" is on the display?? or you get the same thing....

 

[RESCUE4NFD]

Ltr System

Everything on the scanner is working fine,I have the trunk system on LTR,and the Freq.s are in the proper LCN's,and the XXXLCN's are empty,and the L is on!The LTR System is Comtex in Dallas,and is Loud/Clear,but does not track.

 

[pro92b]

Are the frequencies set to LTR? Manually select a frequency and press and hold TRUNK for two seconds until the radio beeps. Repeat for each channel.