• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

mdx

Status
Not open for further replies.

acm10

Member
Joined
May 11, 2004
Messages
54
im in the prosess of programing an mdx and having some problems i cant seen to get more the 3 systems or groups to program into the radio im also having a problem ive got 4 systems entered into the progaming but on system 3 i only see 3 out of 10 channels and i dont even see system 4 or any of its channels
 

morganAL

Member
Joined
Nov 28, 2005
Messages
477
Location
Somerville, AL
Sounds like you have loaded the radio with info beyond its capacity. You can load the same profile into a 16 sys/grp radio as well as a 128 sys/grp radio and it will take it with no errors. You just can't access the additional systems or groups. I assumed this is an 800 mhz trunking MDX.
 
Status
Not open for further replies.
Top