Good day. just want to ask if anybody could help. i have existing motorola gm300 repeater using hln3333b (rick) controller on uhf, the repeater works fine, but i want to have a link using the j4 tab pin ACC, question is does it work on plug and play on a default pinning of a stock cable of the rick? If not, what is the modification i need to do on the controller? thank you
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
Motorola Gm300 Repeater with link
- Thread starter JuanSix
- Start date
All pins on the J4 are active depending on the dip switch settings. I'd review the manual.
thank you. will check for the right pinning and dip switch settings for my application
JuanSix I would like your help on that dip switches. If I understand you correct you want to connect a link radio onto the J4 acc pinouts on the RICK controller and that is exactly what I want to do. In my case we have a VHF repeater and we want to link a UHF radio to it via the J4 accessory point. I will appreciate your feedback and help in this regard. My mail address is zs3epienaar@gmail.com 73'
Good day sir, what specific unit of radio are you running to for the repeater?
Similar threads
