• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Motorola "on-site business" v "commercial radios"

Status
Not open for further replies.

ryancousins

Member
Joined
Aug 28, 2003
Messages
13
Reaction score
1
Location
Portage, MI
When looking up Motorola's business radios (everything besides FRS, DMR, or P25) there are two categories to click on on their website. "on-site business" and "commercial". Lines in on-site include CLS, DTR, DLR, WAVE, RDX, RM, and CLP. Lines in commercial include BPR, CP, VL, VX, and EVX. Any ideas about why there are two categories? I don't see any clear divisions between the lines in each category. I could understand if one category were all digital and the other analog, or one was all license-free and the other licensed, etc, but it doesn't seem to be so clear cut.
 

kayn1n32008

ØÆSØ Say it, say 'ENCRYPTION'
Joined
Sep 20, 2008
Messages
7,369
Reaction score
2,299
Location
Sector 001
Think on site business as radios for target, Lowe’s, Home Depot, mall stores and the such. The DLR/DSR are 900MHz spread spectrum. Pre-programmed with a limited selection of itinerant/colour dot/star channels. The programming software will allow changing frequencies from a pre-defined list, and quite often are low power 2w or less.

Commercial line is better quality, aimed at a rougher environment. Factories, light-ish industrial use. They are able to be programmed in the entirety of the VHF and UHF spectrum and require licensing in either itinerant or industrial/business bands. These radios will be able to do up to 5w.
 
Status
Not open for further replies.
Top