MOTOTRBO R7 Radio ID display

[kyle4269]

Hello everyone,

We are currently using a Capacity Plus system, and I've observed that when a transmission occurs, the Radio ID is displayed. However, once the transmission ends, the Radio ID disappears. Is there any adjustment I can make in the codeplug to extend the duration of the Radio ID display, or to keep it visible until the next transmission?

Thank you!

 

[peq387ab]

On the mobile or portable to my knowledge I don’t think there is a setting that can extend the UID. Since it changes with each transmission that is being keyed. On the consoles there is a window that can show last UIDs on the different talkgroups, etc.

 

[asd6845]

I have not found anything on my R7 to do this. Once the other station is done, that is it. Only way I have a slight history is with the audio record feature. Go to the playback and it will display the last 5 radio ID's with its recording. But that won't last long if the talkgroup is a busy one as the recordings are constantly being over written.

 

[kyle4269]

Thank you for the response. This is the number one complaint everyone has in my department. On our old Kenwoods the last Radio ID would stay until the next transmission.

 

[kg4icg]

On the R7's there is a alias list of the transmissions that went thru. It stays there until radio is turned off.

 

[kyle4269]

Thank you for the response. I was hoping to see the radio ID/alias longer. But I’m finding out this isn’t possible.