NC State Fair Monitoring Guide 2018

Status
Not open for further replies.

RaleighGuy

Member
Premium Subscriber
Joined
Jul 15, 2014
Messages
15,276
Location
Raleigh, NC
It's time again for the NC State Fair! Opening day (weather permitting) is this THURSDAY!!!!

NOTE: To monitor the NCSHP Training Center or West Raleigh VIPER Site during the NC State Fair you must have a digital scanner capable of following 700Mhz Sites!!!

For those with scanners the following digital Statewide Event talkgroups on VIPER will be used for this years NC State Fair:

Statewide Events Echo 1 (TG 51971)= LE Interior Ops
Statewide Events Echo 2 (TG 51972)= EMS/Fire Ops
Statewide Events Echo 3 (TG 51973)= Dorton Arena
Statewide Events Echo 4 (TG 51974)= SHP Traffic Posts
Statewide Events Foxtrot 1 (TG 51975)= Special Ops

And on the Wake County System the following will be used:
Wake PS Event 6A (Analog TG 26832) = Fairgrounds staff/Non-Sworn personnel

On the feed I'm also adding Dept of Agriculture (51601-51608) and State Fire Marshall's (52046-52050) Viper talkgroups, as well as the old Fairgrounds Admin/Main/Maint Wake Trunked System talkgroups (32, 48, and 64) though I haven't heard them used in a while.

NC Dept of Labor Ride Inspectors have previously been monitored using the callsign ROBERT-IDA (Ride Inspector) and heard on normal fair related talkgroups.

An online feed of the State Fair this year is being broadcast on a Special Event Feed and is now active:
https://www.broadcastify.com/listen/feed/21326

The NC State Fair website is at 2018 N.C. State Fair - Nothing Could Be Finer!

A map of the fairgrounds can be downloaded at http://ncstatefair.org/2018/Visitor/documents/NCSF18_DS_Map_Letter.pdf

Here's the link copy of a traffic "post" map from years past. I believe it should be pretty accurate for this year as well.
http://qsl.net/ke4znr/NCFair/NCSHPStateFairPost.pdf

Any updates, questions, or issues please send me a message. ENJOY!!!!
 
Last edited:

RaleighGuy

Member
Premium Subscriber
Joined
Jul 15, 2014
Messages
15,276
Location
Raleigh, NC
I've added a new talkgroup (46516) on the Viper system that is not in the database and is being used by Fairgrounds staff. It appears to be in the Wake County TG range and the only RIDs I've noticed are in the 20000xx range. If anyone can identify the actual usage please let us know.
 

KE4ZNR

Radio Geek
Premium Subscriber
Joined
Jan 21, 2002
Messages
7,392
Location
Raleigh, NC
I've added a new talkgroup (46516) on the Viper system that is not in the database and is being used by Fairgrounds staff. It appears to be in the Wake County TG range and the only RIDs I've noticed are in the 20000xx range. If anyone can identify the actual usage please let us know.

This *might* be a patch between VIPER and Wake PS EVENT 6A.
I am not in the area where I can monitor both at the same time to confirm but I have a sneaking suspicion this might be what is going on.

Marshall KE4ZNR
 

RaleighGuy

Member
Premium Subscriber
Joined
Jul 15, 2014
Messages
15,276
Location
Raleigh, NC
The 2018 State Fair Has Ended

The 2018 State Fair has ended, I'm leaving the feed up for a couple of days to monitor move out, however I have removed the Viper event talkgroups as they are no longer in use at the fairgrounds.

Let's plan on reviving the feed next year, thanks for listening.
 
Status
Not open for further replies.
Top