Would someone be willing to provide me the proper Trunking tables for the NC Viper System along with Franklin County Trunking System for a Whistler TRX2 please? I would greatly appreciate it. Thank You
NC Viper Programming Assistance.
- Thread starter anelson5004
- Start date
Shouldn't need trunking tables, as it's a P25 standard system and it gets the data from the control channel.
But it's P25 UHF and not VHF for viper?
Reconrider
Inside the Galaxy
import from the database. You don't need to setup the bandplan, the CC will auto provide that
VIPER is 800 MHz.
tvengr
Well Known Member
Some sites have 700 MHz frequencies. For sites with all 800 MHz frequencies, Standard tables can be used. For sites with any VHF, UHF, or 700 MHz frequencies, trunking tables must be set to Auto Fill.
I live in Cedar Bluff, VA and I'm trying to receive NCSHP Troop F District 2 and 4, and my signal bars are going back and forth but not staying solid, any help would be greatly appreciated.
You can actually receive a VIPER site from Cedar Bluff? I ask because that is quite a ways away from North Carolina with a number of mountains in between. Which site are you receiving, and are you sure that you are not picking up something else closer to you that utilizes the same frequency as the VIPER site?
I'm not receiving a viper site I just have signal bars that are jumping back and forth but not staying steady. It has no audio behind it
Understood. I don’t expect that you will have much luck picking up a VIPER site from that far away unless you live on a ridge/mountain with an unobstructed path into NC.
Similar threads
