I think the 700 MHz channels may be screwed up.
the inputs & outputs appear to be backwards on some. As far as I can tell
they are supposed to be high in low out on that band, and the last 2
channels listed aren't 30 MHz offset either. Something is weird about the frequencies too.
They are different from the ones listed on this document:
http://www.npstc.org/documents/Appendix A - Tables of Interoperability Channels-corrected.doc
I'm not sure if PL tones are really supposed to be used now on
TX FIRE 1, TX FIRE 2, TX FIRE 3, TX LAW 3, and TX MED 1
They have always been carrier squelch before and this conflicts
with the immediate interoperability plan from 2 years ago.
The VCALL and UCALL channels, from what I have seen in other
documents, are always supposed to be carrier squelch.
On p. 4 they left off the last number on one of the callsigns.
On p. 29 the UHF table doesn't have cell border outlines.
If this is really the official release of this document, It looks to me like
somebody should have reviewed it before they approved it.
Tom