Aircargo
Member
Idk…. No sound whats so ever. If i hold rx key down it makes a sound after 20 seconds low… its version 1.21 firmware…i mightive let radio on till battery died on desk but recharged fine then this. Txs in advance all…
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
Anytone No audio 878uv
- Thread starter Aircargo
- Start date
- Status
Was it working then suddenly quit after recharging? Or did it never have audio since you’ve had it?
Aircargo
Member
worked fiiiine. i do not know what happened. it has no sound. antenna works cause i see transmit from my other radio i can hear myself....as if radios on mute....
Gotta ask, you unplugged the programming cable right?
Aircargo
Member
i updated firmware....still nothing. 1.24..... think radio down. anyone know where i can fix.....it transmits..to my icom but when i transmit from icom to anytone handheld no sound.when receiving hear nothing.....its receiving i can see rx light up but NO SOUND
Aircargo
Member
YES...I DO IT GENTLE.....read other post...just updated firmware....cable works fine and plugs in well tight. im easy on it
Aircargo
Member
if i hold monitor button i hear a sound on speaker after 3 sec....like a winding...doesnt get loud just a steady sound low,gotta put ear to it...
Not worried about being rough on it. I just remember leaving the cable plugged in and wondering why no sound.
Try going into optional settings and change your volume range, louder if possible and write to the radio.
Try going into optional settings and change your volume range, louder if possible and write to the radio.
- Joined
- Mar 2, 2004
- Messages
- 2,049
- Reaction score
- 783
Try a speaker microphone. If the audio works with a speaker mic, the internal speaker in the radio might be bad.
- Status
