No audio on stream

[Flyingmagnetar]

Hi Everyone,

My feed is recognized and shows "active" on the Broadcastify website but is silent, except for a hum when I crank up the volume on the receiving computer. I followed the instructions to the letter to install and activate the Broadcastify Raspberry Pi OS. I configured the Dark ice app via the shell, configured the Alsamixer, used the recommended USB audio (Sabrient) and the ground loop isolator. I repeated the instructions on the YouTube installation video. The feed hardware is accomplished with a Raspberry Pi 3B+ and a Uniden radio. When the radio is on with no headphones the audio of the chanel is fine. I tried plugging in earbuds (in case the audio jack was bad) and that was fine too. The power supplies for the Pi and the scanner are the correct voltage and wattages (no power shortage on the Pi end, sometimes I would get that with the Pi 2). I even restarted the router.

I would really like to contribute to the network but just can't get the audio going. Am I missing anything?

 

[DC31]

Got the audio cable plugged into the correct port (MIC) on the usb sound card? Try another audio source, like playing music on your smart phone with the audio cable plugged into the earbuds port.

 

[Flyingmagnetar]

OK just tried plugging in my cell phone and it streams music, now I just have to get it to talk to the Uniden.