• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

NX-700H Multiple inputs

R

Rob422rjm

Member
Feed Provider
Joined
Feb 20, 2006
Messages
3
Reaction score
0
Location
Chester, VT
Our Dept. has NX700 used for an Active Comms interface. The Active Comms is connected to the rear DB25 accessory port, they are inquiring about adding a Command Alert 3 Tone Encoder to this radio ( Back up for dispatch). Is it possible to use both of these inputs as well as the radio microphone.
Thanks in advance for your assistance

911systemsllc.com

Command Alert 3 Controller (CA3) Tone Encoder & Automatic Audio Alerts For Fireground Operations

The Command Alert 3 Controller (CA3), is an innovative tool crafted for versatile use across various sectors such as Fire Fighting, Emergency Medical Services, Law Enforcement and other Public Safety Fields. The CA3 seamlessly integrates with existing mobile radios through a Radio Interface...
911systemsllc.com 911systemsllc.com
active911.com

Power of a Radio from your Cellphone - ActiveComms - Active911

Listen and respond to virtual or agency channels from the ActiveAlert app. Start your free 60-day trial today!
active911.com active911.com
 
kd4efm

kd4efm

Member
Premium Subscriber
Joined
Jul 14, 2002
Messages
3,288
Reaction score
1,414
Location
EL98 Florida
short answer, possible, yes.
Technically more to it than doubling two inputs on one connection.
 
You must log in or register to reply here.
Top