To anyone looking to acquire commercial radio programming software:

Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

To obtain Motorola software see the Sticky in the Motorola forum.

The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Printer and Labels For Cadex

Thread starter KE6CD
Start date Thursday at 10:06 AM

KE6CD

Member

Thursday at 10:06 AM

I recently acquired a Cadex C7400 and know that it will work with the Dymo SE300. I have a SE300 that works (with some issues) but have two questions:

1. Are there any newer printers that will work directly with the C7400 without using Battery Shop? I've seen references to the Dymo SE450 but it's not clear that will work without the additional software.

2. What labels are folks using with the SE300 and other printers for battery labels and reports? One post suggested Label Value LV-004. Are there others?

Thanks in advance.

Fred, KE6CD

You must log in or register to reply here.