• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Problems Trunking with BCT8

Status
Not open for further replies.
wvhilbily8

wvhilbily8

Member
Joined
Feb 5, 2005
Messages
3
Reaction score
0
:?:
Please forgive me if I sound stupid, but I need help on setting up the trunking for Ft Benning Ga Freqs, using a BCT8. I have the Freqs that they use. The problem is I just cant figure out how to setup the trunking. The radios they use are MA/COM, and the freqs are in the 400mhz range. Dont know how to setup the base, spacing and offset channel. thanks for the help.
 
Status
Not open for further replies.

Similar threads

S
BCD396T/BC996T: I need some help with a 996T and a project....
Replies
7
Views
516
hiegtx
hiegtx
N9JIG
  • Article
Scanner Tales: Ladders
Replies
12
Views
916
evilbrad
evilbrad
A
RTL-SDR V4 upgrade to RSP1B woes
Replies
7
Views
795
far342
far342
N9JIG
  • Article
Scanner Tales: How my scanning has evolved
Replies
7
Views
884
MiCon
MiCon
N
OP25 Missing metadata in Icecast2
Replies
8
Views
1K
boatbod
boatbod
Top