BCD325P2/BCD996P2: Program BCD325P2

[Doxie0033]

I just purchased a Uniden BCD325P2 scanner. I think there is only one county code setup, how do I setup more? Looking for someone near Akron, Ohio for help!

 

[buddrousa]

You buy a Premium Subscription Use the Choice of your software with a 30 Day Demo and Download what you want to hear.

 

[a727469]

What’s a “county code”? Also recommend you post a request in the Ohio forum

 

[doctordialtone]

I just purchased a Uniden BCD325P2 scanner

Here is a manual for your scanner:

Easier to Read BCD325P2 Digital Scanner Manual

Learn to program it yourself and enjoy!

 

[eaf1956]

What’s a “county code”? Also recommend you post a request in the Ohio forum

Maybe a SAME code for WX

 

[wtp]

akron is in summit county.
summit county has one system/tower listed.
with 1 post they sound new.

 

[a727469]

Maybe a SAME code for WX

I never have used them but it could be. I believe the poster may be using different terminology from what I am familiar with.

 

[Doxie0033]

You buy a Premium Subscription Use the Choice of your software with a 30 Day Demo and Download what you want to hear.

I did..thanks

 

[Doxie0033]

Here is a manual for your scanner:

Easier to Read BCD325P2 Digital Scanner Manual

Learn to program it yourself and enjoy!1

Read the manual and also got a hard copy of it..thanks

 

[JethrowJohnson]

Can you specify what channels you want to monitor?

 

[Doxie0033]

Can you specify what channels you want to monitor?

I am from the Akron Ohio area. Looking at Summit county and the Cuyahoga Valley park

 

[Golay]

What’s a “county code”? Also recommend you post a request in the Ohio forum

Doxie. This is your best advice.
Find the Ohio page here in the forums and ask there for someone to come take a look at your radio.

 

[Ronaldski]

Free program to ... program yours. Also has how to videos at the bottom. It doesn't support DMR programming but, most don't usually get that paid oddon from Uniden.

FreeScan User Guide - The RadioReference Wiki

wiki.radioreference.com

Videos

FreeScan User Guide - The RadioReference Wiki

wiki.radioreference.com

Summit is some 80% down at the link and frequencies for summit at the top, only program in the four frequencies in red for Summit.

https://www.radioreference.com/db/sid/6643

Under MODE if D its in the clear and DE is encrypted-don't bother to program them.

 

[Doxie0033]

Thank you everyone!

 

[ka3jjz]

There are quite a few videos out there to help with programming; some are generic for DMA programming, some specific for the P2 scanners. You can find them here

Uniden DMA Resource Page - The RadioReference Wiki

wiki.radioreference.com

Mike

 

[Ronaldski]

Be sure to set your system(s) to ID Scan and set them for P25 Standard under Type.
The videos were made before the 325P2 was available, but all the info provided still applies.

You don't need to assign quickkeys to each groups, I never do, but should for the site(s).

In K4DPS video he made a mistake at the end, - I changed the wiki to add that note.
"@tarantula_live
FYI, once you are done with all the quick keys, click UPLOAD to scanner, not download from scanner. If you download, you will have to reimport and setup everything again."