Programing Thames EMS

[king_pounds]

Hi there, this is my first post...sorry that it's a question..Anyways, I've bought a Pro97 and I'm trying to program Bell fleetnet for the Thames EMS system. I have input all the freq for the London system 8 of them and I have also input the DEC, ID Tags 13 of them as they are shown for London on the freq page here at RR...I set the system type to Motorola and I also put the Rx Mode to Motorola. I read in the help file for Win97 that the Rx Mode and Radio Type should be changed before entering any info so I did that. I think that what I have done up to this point is correct. There is the Mot Custom Trunking Table but I'm not sure which ones I should use from the freq page if any at all. I upload the file to the Pro 97 and choose bank 1 for it to scan the EMS and the radio flashes different channels and such on the display but I never hear any sound. If I put the radio into Manual mode and scan the different channels I have programmed I can hear transmissions. So at this point I'm not sure if it's something with the radio or maybe a setting i am missing in Win97. Any help would be appreciated.

Thanks !

 

[mikewazowski]

You should repost your question in the Eastern Ontario forum or hopefully the moderator will see this and move the thread over.

 

[HT-220]

You should repost your question in the Eastern Ontario forum or hopefully the moderator will see this and move the thread over.

why would he do that when his question is about a system in the U.K.?

 

[IdleMonitor]

Um, No. Mike is right. It's for Ontario's Bell Fleetnet System. So the Eastern Canada forum is the spot for it. Why does Bell offer a Fleetnet system in the U.K.?

why would he do that when his question is about a system in the U.K.?

 

[king_pounds]

Just to let everyone know I got the problem fixed. I had to move everything down to 1 instead of starting at 0.. I didn't know this until a friend of mine told me...so thanks guys