BCD325P2/BCD996P2: PROGRAMMING HELP

[dave3825]

Data base is only as good as its submitted info. Fire could take some time to verify unless your in an active area with many calls.

If it were me, I would try adding the freqs from the 2 FRN in bold.

Entity	FRN	State	County
CHEMUNG, COUNTY OF	0007133937	NY	CHEMUNG
CHEMUNG, TOWNSHIP OF	0008446486	IL	MCHENRY
CHEMUNG, TOWN OF	0010233278	NY	CHEMUNG
CHEMUNG GOLF COURSE INC.	0018268987	NY	CHEMUNG
CHEMUNG COUNTY SHERIFFS OFFICE	0018270215	NY	CHEMUNG
Chemung county	0022014732	NY	CHEMUNG
Chemung County EMO	0022014732	NY	SCHUYLER
Chemung County EMO	0022014732	NY	CHEMUNG
CHEMUNG COUNTY FIRE/EMO	0022014732	NY	CHEMUNG
CHEMUNG, COUNTY OF	0022014732	NY	CHEMUNG
CHEMUNG, TOWN OF	0022014732	NY	CHEMUNG
County of Chemung, Transit	0025674144	NY	CHEMUNG
Chemung Fire DIstrict # 1	0026070557	NY	CHEMUNG

 

[ka3jjz]

I haven't looked at all of these but there's lots of videos from various companies here with programming help...

Uniden DMA Resource Page - The RadioReference Wiki

wiki.radioreference.com

Mike

 

[sallen07]

Hello all I need some help programming my BCD325P2, I’m stuck on what group this needs to be programmed under if it would be conventional or under a P25 trunk

Are you programming by hand or using software? If software, which one? Have you programmed all of the fire channels?

Double-check that the first two are analog, not P25. Try programming them with no tone.

 

[dcmojo17]

Are you programming by hand or using software? If software, which one? Have you programmed all of the fire channels?

Double-check that the first two are analog, not P25. Try programming them with no tone.

I’m using ProScan to program

 

[dave3825]

I would post a thread in the NY forum titled Chemung fire and ask any locals if they can confirm usage on the P25 freqs listed on that county page. Programming will only work if the listings are valid.