Programming trunked systems Pro-197

[Bonkk083]

I haven't programmed a trunked system in a while do I put in each site or just the system and add frequencies of each site

 

[Nasby]

Enter the control channels of the sites you want to scan. Click on the System Frequencies tab in the upper right, then enter the frequencies.

 

[tvengr]

The talkgroups you have programmed probably don't see much action. You probably will not be able to hear Chester Fire unless you are able to receive the Chester County Simulcast site. Do you have an interest in Chester County? Please attach your Win500 programming file so we can take a look at it. You will need to zip the file to be able to attach it. Click on Attach files and open the zipped file.

 

[tvengr]

Give this file a try. Save the attached zipped file to your computer and extract. Open the extracted file with Win500. Connect your computer and scanner with the programming cable. Go to the Scanner tab and click on Upload to Scanner. Scan lists 1 thru 7 use the Palmetto 800 trunked system. Scan lists 8 thru 12 are conventional frequencies. Scan lists as follows:

SCAN LISTS:

1. State Interop

2. State Emerg Ops

3. SCDOT/Hwy Patrol

4. UnionCo Fire/EMS

5. UnionCo Law

6. ChestCo Fire/EMS

7. ChestCo Law

8. UnCo Misc Conv

9. UnCo FD/EMS Conv

10. UnCo Law Conv

11. ChCo FD/EMS Conv

12. ChCo Law Conv

 

[AngWay]

I have a issue with my pro 652 for some reason my hit count won't show up in arc500 some do but some don't, Like when i see the scanner stop of channels and i copy the radio into arc it show's most of the one's i seen stop on the radio but there are a few that isn't showing it's hit count, i do have hit count enabled globally .